jining bafang mining machinery co.,ltd -

jining bafang mining machinery co.,ltd

Showing 11 - 20 of 57, total 6 pages [First] [Previous] [Next] [Last]

mining dn16 inner column hydraulic prop pipe
Specification: dn16
Detail: Model Max height(mm) Min height(mm) Distance(mm) working resistance(kn) Working pressure(***) cylinder diameter(mm) base area(mm*2) Weight(kg) DN16-250/80 1600 1100 500 245 49 80 120 4...

mining dn 08 inner column hydraulic prop pipe
Specification: dn0.8
Detail: Model Max height(mm) Min height(mm) Distance(mm) working resistance(kn) Working pressure(***) cylinder diameter(mm) base area(mm*2) Weight(kg) DN08-250/80 800 590 210 245 49 80 120 26 ...

good quality dwb frp single hydraulic prop
Specification: dwb28
Detail: Product Introduction DWB series light single hydraulic prop, FRP single hydraulic prop are the backbone of external fluid for constant resistance type. It is used as temporary support equipment in coal mining du...

mining dwb 28 single hydraulic prop from factory
Specification: dwb28
Detail: Maximum height 2800mm Minimum height 2230mm route 570mm rated working resistance 30KN Rated hydraulic 3.8*** Initial supporting force 30KN hydraulic cylinder inner diameter 100mm weigh...

whole head sheave
Specification: TXG-800/16
Detail: Head sheave, hoisting sheave Head sheave also called sheave wheel set on the top of the derrick or blind shaft, retainer hoisting cable guide wheel. Mine shaft head frame top wire rope direction of crown block adjustment...

yqa split rail extrusion hole machine
Specification: YQA-24,YQA-38
Detail: Product introduce YQA split rail extrusion hole machine are widely used in mining, railways and other departments of the track laying and renovation and repair. technical parameters: Model Opening Size (m...

popular horizontal switchman machine
Specification: handle length 290 mm,
Detail: 1. The telescopic handle length 290 mm, when rail transition resistance is not big, can shorten the length of the handle, on the other hand, extend the length of the handle. 2. To reduce the handle pull (stroke), the handle c...

ytf-400 rail gap adjuster
Specification: YTF-400
Detail: ***ail Introduction Under normal circumstances, one can push a length of 12.5 m 43Kg / m rail 4-5 roots; 25 m 43Kg / m rail 2. YTF-250 rail joints checked before Used: a. whether the oil level in the tank reaches two-thirds...

mining rail pressure control
Specification: WJK-TG24
Detail: ***ail Introduction 1 Used to compress the fixed rails 2 Match: cover, base, adjust the show, bolt, nut, spring washers, flat pad 3 Install a on one side rail Technical parameter Level of bolt: 4.8/8.8 ...

sbz-1 railway lever drill
Specification: SBZ-1
Detail: Product Description: 1.High safety 2.Easy to use 3.More power and longer life Technical parameters: model SBZ-1 Weight 6.0kg Introduction Bit another purchase Supporting lever drill bit diamete...


Showing 11 - 20 of 57, total 6 pages [First] [Previous] [Next] [Last]
1 2 3 4 5 6